fbpx

How to manually setup Fanvil IP phones

How to configure Fanvil phones
  1. Connect the phone to the power source and to your internet router and give it a few minutes to power on.
  2. Factory reset the phone (physically on the phone) by pressing menu button > Settings > Advanced Settings (default password is 123) > Reset to Default > Press yes to continue
  3. Press Menu > Status > to get the phones ip address (starts with 192.)
  4. On your computer/laptop, type in the phones ip address into a web browser -> you will be displayed with a login page
  5. Type in the user and password. Default user & password is “admin”
  6. Click on “line” on the left-hand side of the page
  7. Type in the details you are provided with and click “Apply” at the bottom of the page. See example below;
    1. Line – SIP 1
    2. Username: 1000
    3. Display Name: 1000
    4. Activate – tick the box
    5. Authentication Name: 1000
    6. Authentication Password: Password provided
    7. Server Name: Server name provided (test.voip.belldial.co.uk)
    8. Register Address: test.voip.belldial.co.uk
  8. Click on “Apply” at the bottom of the page

  9. Once you have clicked on “Apply”, it will take a few seconds and you will be displayed with Line Status – Registered as seen in the screenshot below

Copyright 2023 © Belldial Limited